The hair clipper is an indispensable tool for both professional masters and “home hairdressers“. These devices for a hairstyle differ on household and professional. But those and others, sooner or later fail. Usually this unit is repaired by electrician repairmen, for example, in a household. But some malfunctions of the machines can be fixed by hand. Before you start the search for breakdowns, if your tool does not work well, you need to have an idea of the internal structure of this machine for cutting.
Hair clipper device
There are 2 types of units for haircuts, which differ in the principle of action.
This type of clippers is the most expensive hairdressing power tool on the market and is available in two versions: mains powered devices and cordless tools. Rotary machines are distinguished by their reliability, high power and durability. The main driving element of this unit is the electric motor, on the rotor of which an eccentric is worn. When rotating, the eccentric connected to the movable knife moves it in different directions. Also in the apparatus there is a knife block consisting of a fixed part and a movable part.
In the standalone version in the instrument case are accumulator battery (Battery) and control board.
Vibrating
This is a budget option for power tools for hairdressers than discussed above. In this machine instead of an electric motor coil installed. In front of the coil is a pendulum containing a permanent magnet. When current passes through a coil, the polarity of the magnetic field at a frequency of 50 Hz changes at its core. Therefore, a permanent magnet in a pendulum changes its position all the time, and since the latter is connected to a movable knife, it begins to move. Also in the device you can watch the power button.
Major faults
Search for breakages in devices for cutting can differ, depending on their design features.
Rotary device faults:
- breakdowns in the head of the nozzle block,
- electric motor failure,
- control button breakage
- problems with the network wire,
- eccentric wear.
Battery failures:
- battery life has expired, or it is faulty,
- power supply failed
- problems with the cord coming from the power supply to the unit,
- control board burned out
- mechanical failures in the knife block.
Vibration machine faults:
- open coil winding
- loud noise,
- Faulty network cable
- power button breakage.
In addition to all these problems, there are breakdowns that are inherent in all types of hair clippers: the tool does not cut at all, cuts badly, with gaps, tugs or chews hair.
Fault finding algorithm
First of all, if your hair clipper does not turn on, it is necessary to check the presence of voltage in the outlet, as well as checking the power cord and plug. The voltage in the outlet is checked very simply: plug any electrical appliance into this outlet. If it works, then there is tension. Next, you need to check the plug: if it is collapsible, then you need to unwind it and make sure that there is a good contact of the wire with the plug pins. If it is not collapsible, you will have to disassemble the unit and ring both wires with a tester.
A frequent reason for why the machine does not work may be a faulty power button. In addition, you should make sure that the wires are not soldered from its contacts.
In the case when the button, wire and plug are in order, check whether the contacts inside the device are soldered to the engine or to the coil. If problems with contacts are not found, then you will need to ring the windings of an electric motor or coil.
If it stopped working rechargeable hair clipper, then first of all the power supply is checked. Next, you need to check the battery inside the unit housing. In the case of a non-working battery, it will have to be replaced with a new one, since the repair of the battery will not work. If the power supply and battery are OK, then the control board (if available) is called.
In case of malfunctions caused by mechanical damage internal parts of the device, the electrical part of the unit will start. Therefore, damage is sought in the head where the knives are located, or in the block where vibrations are created. This may be a problem with the eccentric (in inexpensive models it is made of plastic, it quickly wears out), or a pendulum breaks at its junction with a movable knife.
If you notice that the device is chewing or pulling hair while cutting, causing inconvenience, then it’s time to take care knife sharpening. This procedure is best left to a specialist who has special equipment for these purposes. Attempts to self-sharpen knives usually lead to the fact that they have to throw away. If the machine has stopped cutting, you will need knives adjustment.
Rotary machine does not start, the lights are on
This problem sometimes occurs when blockage of motor rotor or eccentric. At the same time they are jammed, the motor heats up and may buzz slightly. It is necessary to disassemble the body of the unit and clean the rotor with the eccentric from dirt, then assemble the device and try to turn it on again. Also, if the device falls, then in this case there may be a power failure, which is fed to the motor. It is necessary to open the case and check the soldering in the places where the conductors are connected. If the wires are disconnected, solder them.
The machine does not start, the lights are off
Perhaps the cause of the breakdown may be in the power cord or electrical plug. In the case of a battery device, the problem may be hiding in faulty wire or in the power supply. It must be disassembled, check all contacts and ring the coil windings with a tester for the presence of an open circuit or interturn circuit. If you detect these problems in the coil, the power supply will have to be replaced with a new one.
What types of clippers are available on the market?
The modern market is represented by a wide variety of models, but they all fall into two categories:
Rotary typewriters represent devices of a rather expensive segment in the modern sphere of tools for a hairdresser. These models are found in two versions:
- working from the electrical network,
- functioning on the battery.
Among the main advantages of the presented units it is possible to distinguish a long service life, reliability and high power.
The main moving part of such devices is the electric motor, on the rotor of which the eccentric is placed. At the moment of rotation, it acts on the movable knife, thereby moving it around. In addition, in this unit there is a knife block, which consists of static and active parts.
ATTENTION! In a clipper, working offline, the battery and the control board are placed in the case.
Vibration models belong to the budget category. In the device, the motor is replaced by a coil, and in front of it is a pendulum with a magnet. At the moment the current passes through the coil, the polarity of the magnetic field begins to change in its core with a 50 Hz value. In view of the above, the magnet changes its location on a permanent basis, and thus moves the movable knife. Also on this model there is an activation key.
Why the clipper doesn't cut
Depending on the type of hair clipper used, the nature of the fault will differ. So, in the rotary models that are powered from the electrical network, the following failures can occur:
- problems with the network cable (burned out, wiped, etc.),
- the activation key is broken,
- eccentric worked,
- problems are related to the head of the cutting unit,
- broken electric motor.
Autonomous models of rotary devices can upset consumers with such problems as:
- battery failure or charge output,
- Broken charging station
- pull the cord recharging station
- management board burned out.
Vibration models are also not the most reliable equipment and often upset consumers with a variety of faults. The main breakdowns include:
- problems with the power cord,
- activation key failure,
- the coil winding broke,
- In the process, there were extraneous noises.
ATTENTION! To prolong the life of the machine and prevent the appearance of some breakdowns, it is necessary to regularly lubricate the device with special oil.
In addition to the indicated breakdowns, it is possible to distinguish a number of common breakdowns for each type of machine. These include: the device has stopped cutting or skips pieces of hair, pulls or "chews" them.
Faults for clippers that can be fixed by yourself
Some of the damage the consumer can easily eliminate with his own hand, without experience or special knowledge:
- In the rotary typewriter, the indicators have gone out, and the launch is not carried out. This reason is due to clogging of the rotor or eccentric. To eliminate the need to disassemble the case, remove dirt, and then re-check the device for performance. Also, the reason may be associated with the fall of the device. In such cases, the probability of disconnecting the internal power wires is high. To eliminate the need to open the case, and in case of disconnecting the wires to solder them back.
- Rotary autonomous machine does not start. Most likely, the reason lies in a faulty power supply, which simply does not charge the battery. To eliminate the damage, it is necessary to disassemble it and inspect the coil for a breakage. If this is the case, then you will need to replace the coil or simply purchase a new power station.
- Extraneous noises during the work of the vibration machine. In this situation, open the housing and check the position of the coil. Sometimes the screws holding this element can spontaneously unscrew and eventually working, the machine makes a lot of noise. In this case, simply screw these bolts back in and re-enjoy the performance of the hairdressing equipment.
Share in social. networks:
The simplest models of devices for haircuts are arranged approximately the same as razors of the Soviet sample. The difference between them is that in modern models of machines a pendulum-type vibrator is used, therefore the trajectory of the blade movement is not horizontal, but arc-shaped. But even the highest quality and reliable electrical appliance has a tendency to break down over time. The subject of the article: clipper - do it yourself repair.
General principle of the device
The design of these devices is not particularly complex, so there are no particular difficulties in repairing. Here are the main components of this device:
- Transformer with a core of steel.
- Stator coils - 2 pcs.
- Cutting tool.
- Vibration mechanism.
As you can see, there is nothing complicated. If the failure is not very difficult, you may be able to cope with the problem yourself and not have to contact the master.
Consider what you need to fix a hair clipper. The most common reasons that the device refuses to cut are the following:
- Engine breakdown.
- Power supply problems.
- Knives blunted.
Important! In fact, if the knives are dull, the machine works, but does not cut, but simply tears the hair. All that needs to be done in this case is to sharpen them.
Inspection of the device
Before you begin to repair the device, carefully inspect it. The inspection procedure is as follows:
- Inspect the cord: whether it is damaged, whether the plug is detached. If there is damage, it is much easier and safer to replace the cord.
- Check the voltage on the built-in housing.
- Call switches and a switch. If these parts are out of service, they must be replaced.
How to repair a hair clipper: engine failure
The most common malfunction is the failure of the coils. There are 2 repair options: rewind or replace.
Important! Of course, it is easier to replace, but you need an absolutely identical coil with exactly the same number of turns that it was originally in the unit. It may not be on sale.
Rewinding is a matter requiring patience, but feasible even for a student. Rewind can be done with a drill or even manually. The biggest difficulty is not to make a mistake with the number of turns.
Important! More or fewer turns may adversely affect the power of the device.
With regard to power outages - believe me, in many cases the problem is not at all in the typewriter. If the device is running on battery, then it is quite possible that it is time to replace it. If the machine is networked, then such options are possible:
- Make sure there is light in the apartment.
- Turn on the instrument in a different outlet.
- Inspect the plug and cord. If necessary, replace them.
Important! After the repair is successfully completed, do not forget to adjust the position of the knives. To make the process faster and the result was of high quality, use our instructions for setting up a hair clipper.
How to sharpen knives?
For grinding, you need a special circle with a disc made of aluminum. The procedure is as follows:
- Wash and dry the surface on which you will sharpen the knives.
- Pour the abrasive onto the prepared surface, level it.
- Put the knife strictly along the disk radius, clamp it in the clamp, and then start the circle.
- Treat the knife with a special solution and grease.
Important! There are other ways to sharpen. Step-by-step master classes and useful recommendations for solving this particular problem can be found in a special article of our portal useful tips "How to sharpen knives for a haircut?".
Head setting
If the head is set up incorrectly, the machine works, but very poorly. Here is what you need to check in this case:
- The amplitude of the movement of the knife.
- The location of the knives relative to each other. You can adjust them using a regular screwdriver.
- Centering blade housing unit.
Important! We must not forget about prevention. If the device has a simple device, it will rarely break. This fully applies to clippers. But this does not mean that they do not require any care. You need to clean them regularly and lubricate.
If it turned out that the device cannot be fixed, do not rush to throw it away. In a separate publication, we presented some interesting ideas on what can be done from a hair clipper.
Video footage
As you can see, you do not need to go to the store for a new device. If any malfunction can eliminate it on their own. You just need to understand the cause of the breakdown and take the time to repair the clipper.
What to do if the hair clipper broke: Philips or Oster
Before you repair the hair clipper, you need to deal with the internal structure of the device. At first glance, the design of the machine is simple, without technological frills, so the difficulties in the repair process is not expected. The internal structure of the hair clipper:
- voltage transformer
- steel core
- two stator coils,
- vibrating mechanism
- cutting unit with self-sharpening blades (includes moving and fixed parts).
Internal device
The pendulum or rocker are fixed with springs on the sides.Plus, the pendulum is mounted on a bearing (one of the vulnerable points that can easily crack). The movable part of the cutting mechanism is made easy by combining different materials - plastic and metal.
Moser device for trimming animals: dogs and sheep
The device of the coils is simple; any boy can cope with their winding. You just need to buy a wire of the desired length, make a primitive rewinding device and start repairing it. The coils lie evenly from one edge to another, they do not need to be fixed. If a person has minimal knowledge in the field of electronics, it will not be difficult for him to repair and assemble a hair clipper. People who do not know how to handle tools for electrical work will be more difficult. But after studying the theory, you can safely begin to translate their knowledge into practice.
A screwdriver is required to disassemble the instrument case.
We conduct a professional analysis of the Philips and Vitek device in the workshop
The first step is to check the power cord. Quite often, the cause of a malfunction is mechanical damage to the cord, namely its breakage at the very entrance to the case. The presence of voltage is checked with a tester. If the matter is not in the cord, go to the opening of the switch and the voltage switch, in which the contacts often burn. When a malfunction is detected, it is immediately eliminated and the operation of the device is checked.
Multimeter - device for ringing wires
Power supply features of Roventa and Scarlet
In devices with a built-in battery, there are often problems with the batteries themselves and with chargers. Causes of failure can be as a wire break, and the failure of the electrical circuit.
The reason for the poor performance of the device may be incorrect setting of the head, lack of lubrication or wear of the return springs. It is necessary to pay attention to the amplitude of the movement of the knife: if it is incomplete, you need to adjust the tension mechanism.
Sometimes you just need to grease the knives of the device.
The location of the knife block also plays a rather big role. The casing is located in the center of the case. If an inspection reveals an offset, the parts need to be adjusted by filing. It may be necessary to adjust the relative position of the knives with a special screw under the screwdriver. They can adjust the size of the gap. The edges of both parts of the cutting unit must be identical (parallel).
The bolts holding the fixed part, gently unwind. Fixed block correctly expose and fix the fasteners. After adjustment, the device is tested on a piece of wool. If the knives blunted, they are sharpened on a special machine. After sharpening, the cutting unit is washed in solution and treated with lubricant.
If the device has not yet expired warranty service, you do not need to repair the machine yourself
Repair it yourself or contact the service center at the nearest address?
A hair clipper, like any other household appliances, requires careful attitude. In order to serve the device for a long time, it should be regularly cleaned with a special tool and a soft brush. After shearing, the machine is thoroughly cleaned from stuck hairs.
Device knives should be kept clean.
In order to minimize the occurrence of a malfunction of the power cord, it is necessary to monitor its position.
Vibration machine buzzing heavily
This problem may appear when voltage drops in the network. Therefore, in some devices there is a special regulator with which you can set the optimal operation of the device. Also, increased noise may appear when case damage, for example, after the fall of the unit. It is necessary to open the case and check it for cracks, and how tightly the coil holds. When the power tool was dropped, the coil fasteners could break off, so there is a strong vibration and noise. Sometimes the screws holding the coil may spontaneously loosen. In this case, they must be tightened without exerting excessive effort, otherwise you can break the seat of the screw, and it will start to roll.
Lawyer Answers (11)
Does such a receipt, some force, if it comes to court?
Helena
What kind of power does it have
By a ridiculous accident, having stumbled over the cord of the clipper, she fell, I agreed to pay for repairs
Helena
Describe the situation in more detail, perhaps you are not guilty and do not have to pay, then the receipt does not matter.
Was it at the hairdresser?
Employees should not put their belongings in such a way that you can stumble over them by stammering about them.
Moreover, you and yourself could break something, and they would have to pay damages, so they are guilty.
Client Clarification
It was in the barbershop, with the permission of my colleague, I used her typewriter, at the end of the work I put it on the table while I was spinning around the client, without noticing I stumbled on the cord, in consequence of which she fell. I agreed to repair her with a typewriter. But later, pressure was put on me by her family (I was alone, and there were three of them), being afraid of their cruelty, I wrote a receipt: “I, FIO, in the hairdresser’s“ such-and-such ”down the street such and such, accidentally touched for the cord of the machine, she fell, I pledge to pay for repairs. "
They didn’t give me a car, so I took it to the service center, saying that if they did, they would go to the police and write a statement about the theft. They gave the machine for diagnostics, but now I’m very afraid that the repair price tag may be big ( require all new parts, although the machine is not new). They also said that they would go to court for compensation for material damage.
I do not know how to be and so I bring up one child, the whole sn is spent on a child and 2 credits.
The fact of taking a typewriter in the receipt is not written and the evidence that I took it.
Is it possible to avoid in court a liability and at least pay for repairs? And will such a receipt have a deal? Can I take some responsibility?
03 March 2016, 17:10
The procedure for inspection of hair clippers
First, the cord is inspected, the first step eliminates a significant part of the damage. The inside is often screwed into the case of the block, you can check the presence of the supply voltage tester. Secondarily, the switch and the voltage switch are ringing. If necessary, the problem is eliminated (in the absence of parts, short-circuit the contacts). Particular attention is paid to soldering.
When the hair clipper does not work satisfactorily, the matter is explained by the incorrect adjustment of the head, it is time to inspect and lubricate the product. Return springs wear out. By the way, the tensioning mechanism is also regulated, if the amplitude of the knife movement is incomplete, pay attention to this detail. There are specific moments. The casing of the knife block should be centered relative to the body of the hair clipper. If this is not the case, the parts are fitted to each other by filing. Pay due attention to adjusting the relative position of the knives. In Moser, for example, on the side you will find a screw for a slotted screwdriver that adjusts the correct clearance. The machine may not work at all or cut perfectly depending on how correctly the regulator is turned. Samples are conducted on a material resembling wool.
Knives are exposed so that the edges of the movable and stationary go flush. In pendulum models, a position is selected for adjustment when the teeth are parallel. When tilting, one side will be lower than the other. To adjust the relative position of the Moser two screws that support the fixed part. The assembly is hanging on the holder. The bolts are relaxed with a screwdriver, after which the exhibition takes place as desired. Then the fastener is tightened. In the case of a slotted screwdriver, use the widest tip possible, the iron is not hot, it will be damaged when twisting.
Knives are often blunt. Sharpening are special machines. They are a kind of potter's wheel, aluminum disc. To begin with, the surface of the table is carefully cleaned and dried. After the abrasive is poured on top, it is leveled with a flat plate on the area. The knife is located on the disk strictly along the radial line. The laser pointer is built in the machine tool-grinding. The knife is clamped with a special clamp, the circle starts. The master gently presses from above, the sparks must fly in the direction of the teeth. At the end of the procedure, the knives are washed in a solution, lubricated. Inspection is carried out on a piece of wool or other material resembling hair.
The nuances of the design cause small differences that characterize the self-repair of their own clippers. In Moser, Torx screws are often used in the knife block, and the return spring is one - two-sided.
Steel spiral ears hooked on the movable knife, which is threaded into the anchor during installation. The slice level control presses the same spring, adjusting the position of the knife. In the same models, there are no coils at all. Inside there is an engine equipped with an eccentric shaft. The rod moves the knife to and fro. Accordingly, there are no magnets inside, the knife is extremely light, due to which the efficiency of the device increases (the inertia of the moving unit is minimal). The power board supplies (externally collector) motor voltage. Check the operation of the motor is easy - call the windings, the resistance should be a few tens of ohms.
The board is assembled on chips and is powered, including the battery. To replace the source, you will have to get hold of a Torx screwdriver on the seven, after removing the case, all the necessary operations are performed. The battery itself resembles a finger-type batteries, assembled in a bundle of three pieces, but in fact it is easy to charge from the AC network through the adapter. Clearly, inside the switching power supply, on this issue you can go over our website, there are a lot of articles posted on how to proceed.
In short, inside there is a row of input filters through which the voltage flows to a key element (transistor, thyristor, less often a relay). The control signal generates a high frequency generator. Due to this approach it is possible to reduce the weight and size of the transformer. Actually, the technology is used today in power supplies. This applies to cell phones, laptops and other household appliances. In this sense, repairing a dog grooming machine is no different from high technology. What could break here?
- Diode bridge.
- Capacitors and filter resistors.
- Transformer.
- Key (transistor, thyristor).
- Generator.
At the exit there are also Schottky diodes. Selected for low voltage drop on open junction. Thus, repairing hair clippers with their own hands requires basic knowledge in the field of electronics. That's it for today! We sincerely hope that we help readers overcome the fear of household appliances.
Where to get a claim for a refund of insurance
Trouble Shooting Algorithm First of all, if your hair clipper does not turn on, you need to check the presence of voltage in the outlet, as well as check the power cord and plug. The voltage in the outlet is checked very simply: plug any electrical appliance into this outlet. If it works, then there is tension. Next, you need to check the plug: if it is collapsible, then you need to unwind it and make sure that there is a good contact of the wire with the plug pins. If it is not collapsible, you will have to disassemble the unit and ring both wires with a tester. A frequent reason for why the machine does not work may be a faulty power button. In addition, you should make sure that the wires are not soldered from its contacts. In the case when the button, wire and plug are in order, check whether the contacts inside the device are soldered to the engine or to the coil.
Hair clippers.
The hair clipper belongs to the category of technically complex products. And according to the Law "On Protection of Consumer Rights", the buyer cannot return a technically complex product back to the store if it is of good quality.
- Rules for returning technically complex products
- Is it possible to return the clipper?
- Return policy
- Timing
Rules for the return of technically complex goods The rules for returning / exchanging goods to the store are governed by the provisions of the Law “On Protection of Consumer Rights”.
How to make a hair clipper repair yourself?
This applies to cell phones, laptops and other household appliances. In this sense, repairing a dog grooming machine is no different from high technology.
- Diode bridge.
- Capacitors and filter resistors.
- Transformer.
- Key (transistor, thyristor).
- Generator.
At the exit there are also Schottky diodes. Selected for low voltage drop on open junction.
Is the hair clipper returnable?
It is a disease of wired machines, because hairdressers do not always monitor the position of the wire and it breaks (often with the accompanying short circuit) .2 Breakdown of the plastic case of the machine in various places. More often it is possible to restore the case, but sometimes you have to change the case completely. 3 Breaking the switch. Here sometimes contacts are burned or plastic tabs on the switch break. In the second case, it is usually changed to a new switch. 4. A battery eccentric machine wears out, then it seems the machine works, and does not shear.
Understandably, if a small knife does not make a certain amplitude of movement, then it will not cut it. 5. In vibration machines it is rare, but there is a break in the coil winding. It is good if it is at the exit, and if it is inside - repair is serious. 6. Increased noise in vibrating typewriters.
Dismantling hair clippers
- If during the warranty period set for the product, the buyer did not use it for more than thirty days due to constant breakdowns and repeated elimination of deficiencies,
Returning a technically complex product due to its poor quality, the buyer can push one of the following requirements:
- Repair of goods within the warranty period,
Information According to the Law, the maximum warranty period should not exceed forty-five days. If after this period the goods are not returned to the buyer, they start to “drip” in the amount of 1% of the value of the goods.
- Replacing a defective product with a similar, but high-quality analog,
- Replacing a defective product with a similar product, but a different brand,
If a similar product of another brand is more expensive or cheaper, the seller will recalculate its cost.
DIY Hair Clipper Repair
Vibrating machine buzzing heavily This problem may appear when the voltage drops in the network. Therefore, in some devices there is a special regulator with which you can set the optimal operation of the device.
Also, increased noise may occur when the case is damaged, for example, after the unit has been dropped. It is necessary to open the case and check it for cracks, and how tightly the coil holds.
When the power tool was dropped, the coil fasteners could break off, so there is a strong vibration and noise. Sometimes the screws holding the coil may spontaneously loosen.
In this case, they must be tightened without exerting excessive effort, otherwise you can break the seat of the screw, and it will start to roll.
Moser, wahl, ermila. professional hair care products
Thus, we can conclude that you can only return the clipper if it turns out to be of poor quality. Read the return policy in the next section. Return Procedure You can return the clipper if it has a flaw.
- Badly cuts, pulls out hair,
- All nozzles do not work,
- Peeling paint off the machine,
In case if you find any defect or deficiency in the purchased machine, you should take the following steps:
- Pack the machine in the same package with which it was sold,
- Find a check from the product,
- Find the warranty card for it,
- Take your passport with you
- Come to the store and identify the reason for the return of the machine.
The small size of digital technology has attracted the designers of the clippers. Whether inside the hair clipper stands a pendulum (Moser), rocker, both are held by two return edge springs. The stator does not touch the rotor, otherwise, working, gave a grinding sound.
Regulatory purposes will serve a special screw mechanism. The pendulum is often mounted on a bearing. Fails - noise will be heard.
The moving part is made as light as possible, the knife can sit on a plastic part (the specific density of the polymer is several times smaller than steel). The pendulum may crack in the bearing area. Previously, it was necessary to put the clamp, change the part, today's adhesives firmly take. Try Titan. Coils Hair clippers delight coils. Ordinary chokes, coils schoolchild.
Hair clipper reason for cancellation
- if there are no records in the warranty card of the goods,
- within the first fifteen days of purchase,
- if the product was not in use,
- if the product has retained its presentation (labels, tags, stickers, etc.),
- if the buyer has not violated the integrity of the packaging of the goods,
- the buyer has a receipt, (How to return the goods without a check, read here.)
If more than fifteen days have passed since the purchase, it is possible to return a technically complex product in the following cases:
- If he has a significant flaw that prevents the use of the goods for the intended purpose,
- If the goods put in for repair under warranty, stayed there for more than a fixed period (forty-five days),
This paragraph is governed by Article 20 of the Law "On Protection of Consumer Rights".
Repair of Hair Clippers - Manufacturers
Center in Primorsky district:
Location:
In TC Cosmos, 2nd floor. The nearest addresses are: Prospectuses: Kolomyazhsky, Bogatyrsky, Testers, Koroleva, Streets: Parachute, Gakkelevsky, Staroderevensky, Glider, Sharov, Dolgoozernaya.
Metro station: Curfew Avenue
Working hours:
from 10:00 to 20:00 (no weekend)
Metro station: Lakes
Working hours:
Mon-Fri: from 10:00 to 20:00, Sat-Sun: from 10:00 to 19:00
Center in Krasnogvardeysky district:
Location:
On the 2nd floor in the shopping center Rzhevka room number 2-07b. Nearest addresses - Prospectuses: Irinovsky, Kosygin, Industrial, Mentors, Streets: Communes, Leading, Enthusiasts, Udarnikov.
Metro station: Bolsheviks
Working hours:
from 11.00 to 20.00 (seven days a week)
Center in Kalininsky district:
Location:
Entrance to the basement, near Magnit. Nearest addresses - Prospectuses: Northern, Enlightenment, Lunacharsky, Streets: Kirishskaya, Toksovskaya, Luzhskaya, Ushinsky, Kirishskaya.
Metro station: Civil Prospect
Working hours:
from 10.00 to 20.00 (without days off)
Center in Kirovsky district:
Location:
On the 2nd floor of the shopping center "South-West" near the Media Markt. The nearest addresses are Metro Kirovsky Zavod, Avtovo, Leninsky Avenue, Stachek, Marshal Kazakov Street, Marshal Zakharov Street, Doblosti.
Metro station: Kirov factory
Working hours:
from 10.00 to 21.30 (seven days a week)
Center in Vasileostrovsky district:
Location:
On the 2nd floor in the TK "Morskoy". Nearest addresses - Metro: Vasileostrovskaya, Primorskaya, Prospectuses: Morskaya Embankment, Vasileostrovsky, Streets: Shipbuilders, Nalichnaya, Uralskaya.
Metro station: Seaside
Working hours:
from 10.00 to 20.00 (without days off)
Center in the Frunzensky District:
Location:
on the 2nd floor. Neighbors FIX-PRICE. Nearest addresses - Metro: Bucharest, International, Prospectuses: Glory, Vitebsk, Addresses: Sofia, Salova, Bela Kuna, Fucik, Budapest, Paris, Turku.
Metro station: International
Working hours:
from 10.00 to 20.00
Center in the Pushkin District:
Location:
Two end entrances to the Magnet Cosmetic Shop. Nearest addresses - Prospectuses: Novgorod, Vitebsky, Moscow Streets: School, Pushkin, Okulovskaya
Metro station: Kupchino
Working hours:
from 10.00 to 20.00 (Sat, Sun - weekend)
Center in Krasnoselsky district:
Location:
Front entrance with Valor. Nearest addresses - Prospectuses: Leninsky, Kuznetsova, Heroes, Petergofskoe Highway, Streets: Valor, Marshal Kazakov, Marshal Zakharov,
Metro station: Leninsky prospect
Working hours:
from 10.00 to 20.00 (without days off)
Center in the Frunzensky District:
Location:
Entrance from the parking lot. 6 steps up. Nearest addresses - Metro: Kupchino, Zvezdnaya, Prospectuses: Vitebsk, Glory, Danube, Addresses: Sofia, Bucharest, Small Balkan, Oleko Dundich, Budapest, Kupchinskaya.
Metro station: Kupchino
Working hours:
from 10.00 to 20.00 (Sat, Sun, weekends)
Center in Kalininsky district:
Location:
Entrance to the Magnet store. Near the box office to the right. The nearest addresses are Mechnikov Prospect, Metalworkers, Zamshin Street, Fedoseenko, Vasenko, Antonovskaya, Klyuchevaya, Marshal Tukhachevsky, Gerasimovskaya.
Metro station: Forest
Working hours:
from 10.00 to 20.00 (Sunday is a day off)
Center in Nevsky district:
Location:
On the 2nd floor of the TK "Term". Nearest addresses - Metro: Dybenko, Bolsheviks, Prospectuses: Far Eastern, Podvoisky, Iskra, Friendly, Streets: Dybenko, Antonova Ovseenko, October Embankment, Podvoisky.
Metro station: Dybenko
Working hours:
from 10.00 to 20.00 (without days off)
Center in Moskovsky district:
Location:
On the 1st floor in the shopping center "Plovdiv", near the cash zone. Nearest addresses - Metro: Victory Park, International, Moscow, Avenues: Vitebsk, Astronauts, Streets: Tipanova, Titova, Basseinaya.
Metro station: Moscow
Working hours:
from 10.00 to 20.00 (without days off)
Center in the Vyborg district:
Location:
In the shopping center "Parnas" on the 2nd floor, room A-221. Nearest addresses - Metro: Electrosila, Victory Park, Moscow, Avenues: Engels, Suzdal, Streets: Basseynaya, Warsaw.
Metro station: Parnassus
Working hours:
from 10.00 to 20.00 (Sat-Sun until 19:00)
Center in Moskovsky district:
Location:
In the supermarket "Magnet", after the entrance to the left. Nearest addresses - Metro: Electrosila, Moscow, Prospectuses: Moscow, Leninsky, Yuri Gagarin, Streets: Basseynaya, Varshavskaya, Tipanova, Cuba.
Metro station: Victory Park
Working hours:
from 11.00 to 20.00 (Sat-Sun until 19:00)
Center in the Central District:
Location:
Entrance from Saperny Lane. Nearest addresses - Prospectuses: Foundry, Suvorovsky, Nevsky, Ligovsky, Streets: Zhukovsky, Nekrasov, Rebellion, Radishchev, Mayakovsky.
Metro station: Chernyshevskaya
Working hours:
Weekdays: from 10:00 to 20:00, Sat: 10:00 - 19:00, Wax: 11:00 - 18:00
Center in Primorsky district:
Location:
On the ground floor, section 015. Nearest addresses - Prospectuses: Bogatyrsky, Testers, Sizova, Streets: Tupolev, Gakkelevskaya, Baikonurskaya, Staroderevenskaya.
Metro station: Pioneer
Working hours:
from 11:00 to 21:00 (Sat-Sun until 19:00)
Center in Kalininsky district:
Location:
In T.Ts. Torgovy dvor Archimedes, 1st floor, room 7A. Nearest addresses - Metro: Polytechnic, Courage Square, Avenues: Science, Civil Unsubdued, Northern, Streets: Loyalty, Butlerova, Gzhatskaya, Favorsky, Karpinsky.
Metro station: Academic
Working hours:
from 10.30 to 20.00
Center in Petrogradsky district:
Location:
The second floor of the store Pyaterochka. Nearest addresses - Prospectuses: Levashovsky, Chkalovsky, Petrovsky, Dobrolyubova, Kamennoostrovsky, Streets: Zhdanovskaya, Bolshaya Pushkinskaya, Bolshaya Zelenina, Lenina.
Metro station: Chkalovskaya
Working hours:
Mon-Fri from 10:00 to 20:00, Sat-Sun from 11:00 to 19:00
Center in Kalininsky district:
Location:
How to get? Shop "Magnet", checkout area, sign Umedia Serivis. Nearest addresses - Metro: Muzhestva Square, Vyborgskaya, Chernaya Rechka, Avenues: Lesnoy, 1st Murinsky, Polyustrovsky, Bolshoy Sampsonievsky, Streets: Kantemirovskaya, Kharchenko, Lithuanian, Vyborgskaya.
Metro station: Forest
Working hours:
10:00 to 20:00 (no weekend)
Center in the Vyborg district:
Location:
Nearest addresses - Prospectuses: Enlightenment, Culture, Artists, Suzdal, Streets: Rudneva, Kustodiev.
Metro station: The Enlightenment
Working hours:
For equipment please come to Service on Rustaveli 66
