How to braid volumetric braid?

Send

Spit came into vogue a few years ago. They remain popular throughout this time and are gaining more and more fans, as they are constantly improving, more and more new ones from the variety appear.

These hairstyles are good because they are comfortable and comfortable to wear, quite practical. However, they look complicated and elegant. Spit can act as an independent haircut or be an integral part of a more complex solution. Such hairstyles help to hide hair imperfections and stay elegant.

Some braids are easy to perform and can be done independently. Others are more complex. Such it is impossible to braid on yourself, and in order to braid them on someone else you need a lot of training.

Volumetric braids: with tail and without

Particularly popular are voluminous thick braids that can be created even on thin hair.

Braid volumetric braid can be in different ways - it can be French, turned out, a waterfall, etc.,
The volume of links is created with a pinch technique, that is, the outer part of the hair is taken from their edges and stretched out, as if pulling out of a pigtail. This is not the easiest way, as it may turn out carelessly,
An alternative to the previous method - a very small corrugation, giving the hair volume.

Weaving volumetric braids is a good option for those who have thin or sparse hair. They allow you to visually give them volume. Create the effect of thick, healthy curls.

We add volume with oblique bangs and without

Braid thick braid manages the easiest way. Even a standard pigtail of three strands can become bulky if you know the rules for pulling curls.

Braid braid and gently secure the ends of the hair, without over-pulling. Start pulling curls. Move from the end of the braid to the beginning of the weave. You can do this consistently in the process of braiding,
Hold the link from which to pull the curl. Pull only the outer strands,
To make the hair look neat, first pull it out a little. If necessary, then pull harder.
Ensure that the axis on which the strands intersect is not destroyed. To do this, you hold the links,
Fix varnish each extended link.

After braiding the entire hairstyle also fix, as it is not as strong as a tight braid.

Simple volumetric braid

Separate the hair into 3 parts.
Transfer the left strand through the middle one, then do the same with the right one. Kosa braid free.
Braid the braid to the end and secure it with a rubber band.
Starting from the bottom of each turn of the weave, pull thin strands. It is desirable that they are the same.
Secure the hair with lacquer.

Weaving volumetric braids can be performed with the help of many other techniques. Consider some of them.

The harness is an alternative to the usual braids. Their main advantage is the ease of weaving. It is better to make a harness on a “horse-tail”, if desired, it can be done without tying up the hair, but then it will not be so strict.

Gather the curls in the tail at the back of the head and secure with a rubber band.
Divide the tail into 2 parts.
Twist the right side of the tail to the right side to create a semblance of a rope. But the harder you twist it, the thinner the harness comes out.
Holding the formed harness with your fingers, twist the left side of the tail to the right.
Twist both parts of the tail in the opposite direction and secure them with a rubber band.

Volumetric French braid on the contrary

Recently, the French braid has become one of the popular varieties of braids. A very beautiful volumetric braid can be obtained if the French braid is not braided in the classical way, but vice versa. It can be braided around the center, around the perimeter, diagonally and on the sides.

Decide on the place of the beginning of the braid, then take a strand of hair in this area and divide it into 3 parts.
Put the strand on the left under the middle one.
Put the strand on the right under the middle one.
Separate the strand from the unused hair and merge it with the left strand, and then place it under the middle strand.
Separate the strand from the unused hair on the right and connect it with the right strand, then shift it under the middle one.
So, adding podlet to the strands, moving them under the middle, continue weaving.
At the neck level, continue weaving in the manner of a simple braid consisting of three strands.
Pull the side strands, giving volume to the spit. They can be pulled out and during weaving, this will make the coils evener.

Spit fish tail

Comb your hair a little sprinkle with water or liquid for styling, then divide into 2 halves.
Choose the level from which you want to start weaving. A scythe can be formed from the top of the head, the level of the temples, the back of the head, or just on the bottom of the hair. Weaving can be started from the tail.
At the selected level on the left side, separate the small strand, then shift it through the left half of the hair and connect with the right.
Also separate the strand on the right side of the head of hair and connect it with the left.
To secure the hairstyle, pull the strands slightly to the sides. But do not overdo it, otherwise the braid will come out dense, not bulk. Try to control that the weaving is not tight, for this you can stretch the strands even during weaving.
Continue to weave to the end.
Secure the braid with an elastic band, pull out the thin strands of each turn, giving it volume.

French waterfall

For lovers of delicate romantic images fit haircut "French Falls". She will allow to create easy, volume stacking. Winning this hairstyle looks curled in curls, but also on straight hair, it will look good, especially if they are melirovannye. The weave can girdle the head, creating a wreath from the hair, go down the oblique or form a double row of braids, which looks particularly impressive. “French waterfalls” are woven according to the spikelet principle, but on the one hand, separate strands are produced all the time.

Weaving:

Select the strand in the temple or bangs and divide it into 3 parts.
Weave a braid in the classical way, but the strands located below, all the time, let go of the hair. Replace vacant places with new strands taken from the curls of the upper part of the head. For a more secure fixing hairstyle, you can grab a lock that is located in the temple area or above the ear. It will depend on where the weaving was started.
Continue weaving, moving to the opposite ear.
Fix the end of the braid with a barrette.

Scheme "French Falls"

Square braid

This braid looks interesting and volumetric. Square braid can be braided on the tail or by the French method.

Square braid weave:

Separate the strand of hair in the area of the crown, and then separate it into 3 strands.
Divide the left strand by 2.
Pass the middle one into the divided left strand and join the halves.
Do the same with the right strand.
When creating a braid from the tail, continue repeating the 2 previous steps until you finish weaving. If you are planning to braid a braid according to the French technique, divide the left strand in half and add a small strand, selected to the left of the loose hair, to the extreme left half of the strand, place it under the middle strand and connect the halves.
Do the same on the right.
When the weaving is finished, stretch the strands slightly.

Spit with a tape in the center

This hairstyle is suitable for both holidays and for everyday life. Can be performed on medium and long hair. She will look beautiful and elegant.

Separate the hair strand in the desired area, divide it into 3 parts and secure the ribbon after the second strand.
Place the left strand under the next and on the tape.
Put the right strand on the next strand and under the ribbon.
Add a subtitle to the left strand, then place it under the next one and on the ribbon.
Add a sublet and place the right strand on the next one and under the ribbon.
If you need the right part of the braid to look like the left, put the right strand not under, but under the next one. So, the strand that follows the right one will be between the rightmost one and the podlet, it is to this that the podlet should be added on the right side.

Spit with two ribbons

Usually braid braids on long hair, but on hair having an average length, it will look no less impressive.

Hair break into 2 parts, after each of them fasten the tape.
Pass the left strand under the ribbon, above the second strand and under the other ribbon.
Tape, located on the left, skip under the next free strand, above the ribbon and under the right strand. If you weave a braid like a French, before you move the right strand, you need to add a sublet to it.
Add a podlet to the left strand, and then pass it under the adjacent ribbon, above the strand and under the other ribbon.
Continue weaving to the required level.

Scythe "Chain" with ribbon

Spit, made in this technique, comes out openwork, as if air. It can be woven with a ribbon or only hair can be used for weaving.

Weaving braids with tape should start by fixing the tape. To do this, tie it to a small strand of hair located in the middle of the area with which you plan to start weaving a braid.
Separate 2 strands of the same size from two sides of the ribbon.
Skip the left, and after the rightmost strand over the adjacent and under the ribbon.
Miss the right, the last strand under the next and above the ribbon, then do the same with the left.
Next, the extreme right, and then the left strand skip over the next and under the ribbon. After this step, by passing the strands under the next one, you can add a sublet.
Pull out the "hidden" strands during weaving - the braid structure will be visible.

Spit "Waterfall" with ribbon

Ribbon can be decorated and hairstyle "Waterfall", which was discussed earlier. This allows you to make the image more gentle and romantic. Weaving braids "Waterfall" with a ribbon is almost the same as usual. To do this, tie a ribbon to the middle strand so that the short end is not visible. Next, braid the braid, as described above, but try to arrange the tape so that it enveloped the middle strand. For example, if a strand with a ribbon is at the top, place the tape down, if at the bottom, place the tape up. Taking a new strand of unused hair, continue to weave already with her, if necessary, attaching the ribbon to it.

Braid braid can be with the help of other equipment. In such a hair weave ribbon would be easier.

Separate the hair strand located in the forehead and divide in half. Twist the obtained strands. If you plan to weave a ribbon, tie it to one of the strands and hide the small end. Or completely replace strands with ribbons. Fix them on the hair strands and continue to weave only them.
Take a loose strand of hair and place between the working strands.
Twist the strands again, put a free one between them, and so on.
Fix the end of the hairstyle with tape.

Scheme spit "Waterfall"

The ribbon can not be woven into the braid and can only be used to decorate hair.

Spit on its side

Spit braided on its side, today also enjoys great popularity. This hairstyle can fit almost any image - romantic, evening, everyday and even strict business. To create it, you can use completely different weaving techniques. The easiest way to create a braid on the side is to comb the hair, on one of the sides, to collect it in a bun and braid the usual three-row braid. Instead, you can braid and braid, called the fish tail. The side braid on long hair can be braided according to the principle of the French braid.

Weave braids on the side

Separate the hair with a side parting.

Highlight a strand on the wide side, divide it into three parts and start weaving an ordinary French braid, braid it until you reach the level of the earlobe.

Hair on the opposite side twist into a bundle, adding the lower strands, towards the braid.

When the harness reaches the spit, gather the hairs in a bun and braid them using the fishtail technique - its diagram is presented above. Braid secure with a barrette, rubber band or tape, and then, starting from the bottom, loosen its links.

Weaving on the hair looks impressive and allows you to change the image, experimenting with different types of braids. Hairdressers offer their services in weaving braids, but you can learn to braid yourself and your child yourself: the skill will save time, and a beautiful hairstyle will lift your spirits.

Training

A properly braided braid keeps its shape and neat appearance for a long time. In advance you need to prepare everything you need to not be distracted in the process:

Comb, better than wood. It does not electrify the hair, does not spoil their structure, does not scratch the scalp. It is practical to have two combs: a massage brush and a comb with a pointed handle to part and separate the strands.
Means for fixing hair: gel for styling individual strands, varnish to fix the result, mousse or wax to create volume at the roots, spray to impart obedience to hair.
Accessories for hair: elastic bands, hairpins, invisible. You can make a bezel from the braid, decorate it with ribbons, ribbons, flowers, decorative pins, or, on the contrary, disguise the elastic with a strand of hair.

In the absence of experience, even simple weaving can be practiced on threads or ribbons to understand the principle. For beginners it is difficult to immediately weave a braid itself, it is better to try to braid someone else. You need to start with the simplest options, gradually moving to more complex ones. Beginners do not get everything right the first time, practice and perseverance are important - they will help you learn and achieve the desired result.

The beautiful braid will turn out from pure hair, previously it is necessary to wash them, as usual.
Dry hair electrify, poorly weave, confused. It is necessary to moderately use a hair dryer, apply moisturizing and fixative means to make the hair more obedient.
Before the formation of strands need to comb your hair well, so as not to stick out.
Weak weaving will cause it to crawl, on the contrary, if it is tight, it is bad for the hair, and can cause headaches. Ready hairstyle should keep well and not deliver discomfort.
Need to learn how to take the same strands. So the braid is smooth and looks beautiful. It is convenient to grab the strands with the little fingers of the hands so that the other fingers hold the braid, preventing it from disintegrating.
If you want to braid yourself, it is better to do it without a mirror. On the contrary, it interferes with focusing, knocks down and is needed only to evaluate the final result.

Simple braid

In childhood, all the girls plaited the usual pigtail. Make it a child even a father can. When clever, this hairstyle takes little time and is suitable for every day. The instruction is quite simple:

Comb and divide into three equal parts,
The right strand to throw on the middle, slightly tighten

Move the left strand in the middle, also throwing it on top,
To repeat the movements, evenly tightening the strands so as not to break up,
When the tips will be 5-10 cm, just secure the braid with an elastic band. You can use a ribbon, but it needs to be woven around the middle of the length. The tape is bent in half, it turns out two parts. They are connected to the strands: one with the left, the other with the right. Then weaving continues in the same way, and at the end the ribbon is tied into a knot, if necessary, in a bow.

You can braid a child two braids, or more. In this parting should be smooth, and braids are located at the same height. Especially well look two braids on thick hair. You can start weaving closer to the neck or higher on the back of your head: the appearance of the braid will be different.The bezel from the braid will look beautiful if the length of hair allows.

According to our readers, the most effective hair care product is Hair MegaSpray, a unique spray; famous trichologists and scientists have a hand in its creation. The natural vitamin formula of the spray allows it to be used for all hair types. The product is certified. Beware of fakes.

Fish tail

This is a rather complicated option, its weaving on long hair even in the photo may not look too clear, but you can still learn how to weave it. The reward will be an interesting, unusual hair, looking like a mermaid's tail.

The main secret of this method in the interweaving of very thin beams. In order to make two fish braids, it is necessary to divide the curls into two parts. Then each divide another into two. Very thin bunches are separated from both curls from the edges and intertwined in the middle between the two curls. Thus, the bundle that was in the left strand will go to the right, and vice versa. At the next stage, the following two beams are taken, interlacing the two divisions of the braid. And so on to the end.

The most unruly and heavy hair in the process of creating hairstyles can be further spray spray, you can slightly moisten them before starting to work with water. Be sure to carefully comb and get rid of all the nodules. Depending on the method of weaving, the braids can be simple or complex, but even the lightest ones look neat and beautiful, and their creation with a certain experience and skill does not take much time. We advise you to read about fashionable hairstyles and haircuts 2017 for long-haired girls.

How to weave a French braid?

Another name for this spit is the spikelet. It is more complicated than simple weaving, but it also looks more spectacular. It is suitable even for short hair up to the chin. You can braid her not only for the girl, but also for yourself: among the variants of her weaving, you can choose the right one for the office, party, outdoor activities.

If you braid tightly (moderately), the spikelet keeps for a long time, keeps its shape under a headdress. Step-by-step instruction:

Apply mousse to hair so that it disintegrates less.
Separate the strand on the crown, if you make it thinner, the spit will become thicker towards the neck. If you take more hair, it will be uniform over the entire length.
The resulting strand should be divided into three equal parts. Subsequent strands do the same size.
Combine the first three strands as in ordinary weaving: shift the right one onto the middle one, put the left one on top.
With your left hand hold the left and middle strand. Free hand to separate the strand from the hair on the right side, connect it with the right main weave.
Weave the obtained strand into a spike according to the principle of ordinary weaving.
Holding all three strands with your right hand, separate the new strand from the left side with your left hand.
Connect it with the left strand of the spikelet and shift it to the middle part.
Continue weaving, grabbing the strands from the bulk of the hair on the right and left side.
When all the hair will be woven into a braid, you get three strands that can be weaved like a regular pigtail and fixed with rubber bands.

If the principle is clear, the hair does not take much time.

You can experiment, making different variations: start at the very bangs or at the back of the head (the second option is more suitable for an elongated face - it does not create extra volume at the crown).

You can not interweave all the curls, securing a spike on the back of his head, and leave the rest free. For the original hairstyle, braid it in the opposite direction, starting from the back of the head, and fasten the braid on the crown. For convenience, you need to tilt your head down, otherwise the instructions are the same.

The bead of the French braid looks very beautiful: weaving begins closer to the ear and goes in a circle. The girl can braid a few spikelets or make a small bezel. A difficult option - zigzag spike. It’s not very convenient to do yourself, but it looks original on the girl:

Make a parting in the upper part of the head from the left ear, almost bringing it to the other, evenly separating part of the hair.
In the same direction, start weaving a spikelet.
Reaching the right ear, make a turn, and weave, on the contrary, in the direction of the left ear.
So repeat several times, depending on the width of the spikelet.
It turns spike, like a snake.

Danish braid

Such a pigtail looks like a spikelet in reverse. After training, you can weave yourself a Danish pigtail as quickly as the French one. The principle of weaving is the same, but the extreme strands are not placed on the middle one, but on the contrary, under it, on the eversion. The instruction is quite simple:

Separate the strand in the upper part of the head, divide it into three equal parts,
The right side to put under the middle - it is in the middle.
Send the left strand under the middle one, gently tighten the weave.
To separate the hair strand on the right side, connect it to the right side of the main weave, direct it under the middle one.
The same steps to do on the left side.
Alternately take strands of hair on the sides, not forgetting to pull the whole weave, so that it is uniform and beautiful.
Combining all the hair in a braid, dock it in the usual way and secure with a rubber band.

A scythe can be twisted into a ring, fastened on the back of the head with pins or invisibles: you will get a peculiar shell. Beautifully look two braids on eversion on the sides. Danish can start from the middle of the forehead, or diagonally from the temple. You can also braid on the contrary from neck to neck, or make a bezel around the head.

How to braid volumetric braid?

There are several ways to make a volumetric braid. To make the braid look voluminous, you need to braid the braid over and over and gently pull the locks slightly to the sides, moving upwards. You can weave into the hair ribbon and form a bezel of them.

Just braid three pigtails, finishing each simple braid, and then weave one of the three to make it quite voluminous. Thus you can connect the three braids.

Beautiful braid of four strands suitable even for sparse hair. She requires skill, it is difficult to braid herself, but you can learn:

Divide into 4 strands.
The first strand to put on the second and stretch under the third.
4 put under 1, stretch over 3 above and under 2, fix the position with your hands.
Repeat this procedure until the end of the hair, fasten with a rubber band.

There is another way to weave in four strands:

Take a small strand and braid in a regular braid.
The remaining hair is divided into three parts: you get 4 strands, one of which is a pigtail, let it be the 2nd strand.
4 hold under 3 and place over 2.
1 put on 4 and stretch under 2.
3 hold between 1 and 2.
4 put on 3 and stretch under 2.
Continue weaving according to this scheme, fix it in the end.

If you master the method in 4 strands, it is easy to learn how to make a braid in 5 strands:

Comb and slightly moisten the hair with an atomizer to make it easier to handle.
If weaving itself, for beginners it is more convenient to make the tail and fix it on the back of the head with an elastic band. Over time, you can learn to make a braid without it.
To divide the mass of hair into 5 equal strands, from the first to the fifth from left to right.
pull the fifth strand over the third and under the fourth.
stretch the first strand on top of the third and under the second.
pull the fifth strand over the fourth and below the third.
stretch the first strand over the third and under the second.
Repeat the action according to the scheme, to the desired length, fix the rubber band.
Extreme strands to pull out so that the spit seemed more voluminous.

Unusual option looks "mermaid's tail":

Comb the curls, move them to one side and divide into two parts, fasten one at first so as not to interfere.
To braid two braids is not very tight, fix with rubber bands, and pull out a little strands, so the braids will seem wider.
Connect pigtails with stealth in one canvas. Such a hairstyle is done rather quickly, and in form resembles a mermaid's tail.

Author: Y. Belyaev

Volumetric or French braid for a long time remains one of the main fashion trends in the field of hairstyles. The beauty and ease of weaving are the reasons for its popularity. You can put it in a variety of original ways and, thus, a volumetric braid can become not only the main decoration of the head, but also the relevant detail of another more complex hairstyle. Gentle or daring, modest or showy, you can always choose the option that will be combined with the style of clothing, and fit any event.

Practicality makes this hairstyle appropriate not only for a variety of celebrations, but also for work or at home. Those who know how to braid a volumetric braid understand how easy it is. And, perhaps, the main advantage of a volume braid is the metamorphosis that occurs with hair laid in such a way: thin or even sparse hair begins to seem lush and thick.

Light, but moderate carelessness of the image still remains in fashion, but now the hair must be shiny and silky. Slightly disheveled volumetric braid in tandem with natural makeup will be consonant with the fall of 2015. Stretched loops add to the appearance of hair density, which looks stylish and impressive.

Today non-standard execution of braids are actual. The made volumetric braid bezel itself will add to any image of piquancy. Volumetric braid can stylishly frame or smoothly move into a neat bunch. Grown fringe can be woven into a braid, but leave the rest of the hair loose. The abundance of various fashion trends will be able to satisfy any wishes and be consonant with not only the situation, but also the mood.

Spit Accessories

Minor elements can transform a simple hairstyle, making it a work of art, but the volumetric braid is already remarkable in itself. The choice of accessories is of paramount importance. Beautiful decor will be relevant for the evening out, but in case the hairstyle is too bright, it is important not to overdo it with jewelry and choose a classic dress.

Technique of self-weaving volumetric braid itself

Learning how to braid yourself a volume braid is not so difficult. A little practice and weaving will take no more than 10 minutes. Almost everyone knows how to weave their usual braid, and the volumetric braid is not much different from it. Below is the step by step how to braid the volumetric braid itself.

On the top three thick strands of hair are taken. They should include all hair closer to the forehead.
Weaving begins with the right strand, which is enclosed under the center. Thus, the right strand becomes central, and the central - right. It is important to note that the right strand is enclosed below, not above.
Further, the left strand is woven under the new central strand.
Now a small strand of hair is added to the strand currently located on the right and again weaves under the center one.
With the strand located on the left, we do the same: we add to it a small strand of hair growing on the left and braid under the central one.
The braid is woven, thus, to the end, and then fixed with an elastic band.

Video how to braid volumetric braid itself

The video will help you quickly master the independent weaving of a volumetric braid with your own hands to yourself.

Spit can be different in appearance, but they are all luxurious in their own way. They make the image more gentle, feminine, stylish and beautiful. Particularly popular today is the bulk French braid, as well as its airy, slightly disheveled varieties.

They look especially elegant on long curls, you can create incredible and real works of art on them and conquer those around you every time.

Volumetric and openwork braids today in a trend, they can be made for any occasion and event, suitable for any image. It is easy to create a hairstyle, the main thing is to understand the weaving technique, but there are many ways to create it.The result is striking originality and originality.

Such styling can be done on thin curls of medium length. Medium-length hairs are wound on curlers in front of this, beautiful waves are made and a light fleece near the roots.

When the curl is wavy, it is more malleable to create a hairstyle, keeps the shape, and the bouffant gives extra volume.

For inverted French styling need studs and stealth, in order to fix embossed short strands, as well as varnish, then it does not spread.

The technique of weaving inverted hairstyle is slightly different from the technique of creating the classic French version. Inverted version involves weaving strand through the bottom. It turns out on the wrong side, and on the front part there is a volume braid that can be fixed to the side, while the pattern of interlaced curls is clearly visible. In the classic version of the weaving is not visible, the styling is smooth, but from it you can make an openwork hairstyle. For this, the strands are a little stretched, it becomes lush, beautiful, creates the effect of thick hair.

Bulk French braid, its advantages:

creating a unique and individual style,
luxury view
romantic, gentle, feminine image,
giving hair volume,
suitable for any event
can be done on curls with any length.

Pigtail can be braided in the center, and you can make it diagonally to the side. Having mastered the technique of creating braids, you can make a variety of options for luxury styling for any event. It all depends on imagination and perseverance. So, how to braid a volume braid on long hair?

Such styling is created on the basis of the technique of weaving bulk French braids. It is considered the most gentle and feminine, suitable for celebration and everyday wear, has a beautiful appearance and visually seems airy.

Volumetric braids for long hair are created using this technology:

Parting the side and dividing the strands into two parts,
Start weaving, separating a small strand and dividing it into three parts,
The first interweaving is as usual, the left one passes over the middle one, then the right one,
From the third you need to add loose strands to the main braid, which are located on the right and left sides of the extreme beds,
Continue to braid in this way, moving the braid sideways,
All free locks are added to the main one,
When they do not remain, it is necessary to braid the usual braid further,
To fix the rubber band and release the strands, pulling in different directions,
Sprinkle with varnish.

Voluminous openwork braids on medium hair look no less attractive, even elegant. The technique is almost the same as creating styling on long curls. If it is observed correctly, then you can make a gorgeous hairstyle with an average hair length.

Lace is created on the basis of the French braids.

We must start with the French technology,
When weaving, we need to pull the right strand outward in parts,
It is necessary to pull each hair away, so that between the central part and the right strand a cascade with gaps will appear, this is an open loop,
Repeat the same with the left strand,
Continuing, add loose strands and loop,
Reach the end, pulling the hinges,
Secure with a rubber band and slightly scratch the tips.

Volumetric braids - this is the trend of today.

If earlier they were considered an ordinary styling, then today different technologies allow creating incredible masterpieces on the head, suitable for any occasion in life.

5 working tips how to weave volumetric braids? (photo, video, scheme)

You are here: Home »Hairdressing» Braid Weaving

What girls see women, their braid?
Rich, voluminous, beautiful, neat and spectacular, producing indelible impressions and falling into the memory.

In order to make your braid so, it is worth answering a few questions:

How to weave volumetric braids? How to weave a volume braid correctly?

How to make any braid volumetric? How to braid a volume braid on short or medium length hair?

How to make an evening volume braid: spikelet, french or reverse?

And I would like to know these variants of weaving in 2 variants: on myself and on the model. How to braid volumetric braids on sparse hair?

What kind of braid do you dream?

What girls see women, their braid?

Rich, voluminous, beautiful, neat and spectacular, producing indelible impressions and falling into the memory.

In order to make your braid so, it is worth answering a few questions:

How to weave volumetric braids? How to weave a volume braid correctly? How to make any braid volumetric?

How to braid a volume braid on short or medium length hair?

How to make an evening volume braid: spikelet, french or reverse? And I would like to know these variants of weaving in 2 variants: on itself and on the model.

How to weave volumetric braids on sparse hair? What will different volumetric braids look like in different techniques?

Double braid - weaving scheme according to the type of reverse French braid:

This style of weaving is a French braid, woven in the opposite way, that is, when weaving a braid with rebounds from two sides, the strands are placed not under the braid, but under the braid. And on top of this main spit, another one, more subtle, is woven. Thin can be woven in the same technique or for example in the technique of harness. A thin braid is woven from strands separated from the main braid during its weaving.

To make you understand weaving technology, follow the following steps.

From the crown we dress the hair and divide it into three parts of the same size, and begin to weave a spikelet with hooks on both sides and with lining strands under the braid.

While weaving with fingers or a comb, strands for a small pigtail must be separated, separating them from one of the working strands. This very thin strand needs to be fixed with the help of a clip on the top of the head, after which we continue the weaving with a grab.

Separate thin strands preferably at the same distance from each other, along the entire length of the braid. Even when you run out of hair to grab and you continue to weave the usual back braid, you still need to continue to separate part of the hair for the second pigtail. They will not be convenient to attach the clip on top, so leave them just hang down next to the main braid.

Finish the main braid, securing it with a rubber band. Now let's add more volume to our main spit, for which we will slightly extend each side loop. While pulling, hold the braid at the end.

To braid the upper braid, you need to take the upper strand of hair left earlier and, as for the first time, divide it into three parts of the same thickness and start to weave the reverse braid again, making hooks on one side of the strands left.

Weave to the end and re-fasten the small tip with an elastic band. At the end of the ends of both braids need to connect together.

The appearance of the hairstyle will change dramatically if you leave the strands thicker for the upper braid so that it is only slightly thinner than the main one. And if you pull the loops on the main spit on one side only along the entire length, then it can be rolled up at the bottom of the nape with a snail and you will get a delicate flower.

The second pigtail can be braided with a flagellum, divided into two halves, twisting out among themselves and gradually adding alternately free hair to each half.

Double braid - weaving scheme as usual braid:

This technology of weaving a double braid will allow you to easily create a chic volumetric braid that will last for a long time even without the use of means for fixation.

Split the hair in a horizontal parting on the ear above so that the upper part of the hair is 1/3 of the volume of all the hair. Pierce this hair on top.

From the bottom of the weave a simple braid of three strands, starting from the bottom of the head. Secure with a rubber band and pull side loops for volume.

Dissolve the hair from the crown and make one of them the same simple braid, only it will start a little higher, approximately in the middle of the back of the head.

Dole to the end, securing the rubber band, and slightly pull the loops.The tip of the second spit skip inside the first, to hide it, you can also fasten them together with a common rubber band.

In addition to the weaving technique, the difference between these two options is that in the first - both braids are attached to each other, and in the second - they are connected only at the tips.

What spit do you want?

What girls see women, their braid?

Rich, volumetric, beautiful, neat and effective, indelible and indelible imprint and retentive in memory.

In order to make your scythe such, it is necessary to answer a few questions:

How to braid volumetric braids? How to braid a correct braid? How to make any braid volume?

How to braid a volume braid on short or medium length hair?

How to make a large scythe: a wheel, a French one or a back? And these variants of the braids would be desirable to know in 2 variants: on oneself and on the model.

How to braid volumetric braids on rare hair? What will the various volume braids look like in different vehicles?

Volumetric braids for long hair (photo)

Look at the photo here, you will see:

braid from 4 strands,
braids with a single pod (zmeyka),
French braid (dragon),
braid of bundles,
spit with podpodahpami with free strands.

On the middle hair (photo)

On this photo there are variants of volumetric braids for hair of medium length or short (short hair). Plated braids on the cane or through the entire head in a few rows.

spit fish tail in 2 versions,
braids with a single pod in 2 rows and (snake),
2-nd volume French braid from the tail,
Reverse French braid on the man (with the pods up to the top),
reverse french braid.

Let's start to answer each question in detail and with video and photo instructions.

How to give volume to a spit?

Let's talk about 5 ways to add volume to even splendid hair, which will make the braid more bulky.

Easy, affordable and easy to give volume - this is the flying of the braids, for a great effect, on the night.

A secret that helps to make your hair even more voluminous - this is moisture.

Needlessly, lightly dried hair wrap in a small pigtail, which is smaller, that is, lush hair.

For owners of wavy hair, this method will fit perfectly.

Wash and dry hair.
Split the hair into sections, small squares.
Each square is covered with a braid, from the core, and the ends are tied up with a rubber band, to be finished until the end.

Training video on the creation of volume on the hair with the help of small braids:

Advantages of this method: availability, the lack of special tools, will provide for any length of hair, do not require much time, forever.

Hofre in the French Spit, evening version

Analogue braid, but more quick option - this nozzle "gofre". It looks like a twisting option, like steps.
It doesn’t matter whether your strands are the same or different, they will be pulled back into a braid. Disassemble the braid spit with volume adding with the help of the goffer.

Top 11 fashionable, stylish hairstyles:

The technique of weaving a braid with a gof is as follows:

Treat all hair with heat protection.
Screw the gofer on the pulley, paying special attention to the front strands, the back part in our evening hair will be almost unthinked.

Starting from a place above the ear of the probe with a scythe test.

Start braiding a reverse French braid. Separate the wide and bulky 1st strand. Picking up strands from the 2 sides, to the front part of the spit became the maximum volume and wide.

How to braid the back French braid is considered in this article with the schemes, and the pickups are parked.

Pad the spit to the back of the head, continuing without using conventional pods and tying it with a rubber band. Stretch each strand giving more volume.
Remaining to collect the hair under the crab or enclose the barrier. Choose the one you like the most.

Sprinkle with varnish, hiding the weights or weaving strands. Laying down every link.
Ready hairstyle inspect and close the hair protruding with invisible.

For the ease of weaving the bulk of the French braid, review the video lesson from Neonila Bronestein, where the progress of the haircut is shown.

This option will come in such cases, when the time on the braids is not, and the voice is not right, then the braid with Cash will be local.

It should not be done on long hair or very capacious.

It can be sent to the root or on the strands, it depends on what kind of braid you come up with.

Cons: not properly performed combing leads to a deterioration of the hair condition, capacity.

Before starting to shoot it, watch the video properly combing and give your hair the right texture. Go to such profiles as: Kot, Tatyanin or other hair masters.

Attempting to comb the Comb - this is the main mistake.

To get rid of it is not necessary so:

My head is not combing with the use of shampoo and balm polisher.
When hair dried combing hair combing with rare teeth.

Top 10 Hair Care Secrets:

Strands at the worsh or hair extensions

The first option is more easy to implement, even though not one of the bad ones.

The strands on the barbs will add both volume and length to one, and hair extensions will also not give strength.

These methods are good in constant and long-term use.

When it is constantly necessary for you to do such haircut, then the capture of assets is justified.

Look at the look and length of the hair to the overhead strands and the result of the post. What is the best build-up or overhead strands - this is the question girls decide individually.

Depending on the state of hair and hairdresser's hairdresser.

Do you dream of a bulky, chic spit like that of Elsa?

How to make such a scythe look in incremental photos.

If you don’t understand the process, you will see a step-by-step video with explanations.

Video with use of Haul, hair curlers and straps at the backs:

In the process of weaving the reverse of the French braid, stretching the link with pinching equipment, pulling only the extreme part of the links.

We divide the hair on the probe. Second strand for braid tying rubber.

From the separated large strand, from the test to the temporal region with the sharp end of the hairbrush, we cut the thin strand.

Separate it into 3 strands, from which we will weave a reverse French braid. Putting 2 fingers into the strand, we get 3.

Weaving weaving, shifting the right strand under the center, then left. Second and subsequent plans, with support from both sides. When prodlet sdelan, lightly stretch the edges of the link. This operation is repeated to the occipital region of the head.

This equipment will be made for evening or openwork braids, giving the volume and width to each link, the braid itself takes into account the airflow of the circle.

All draw

Revolve all the steps from the previous technology to stretching the links.

The length of the link is all linkage up to the required volume. In this case, the braids are more voluminous and “rich”, creating the impression of very thick hair and thick braids.

Use this technique as a reference for owners of thin or not very thick hair.

Curls without curlers and ploek

SPREAD FRENCH COSA

1. Thoroughly comb the hair at the roots. Comb it all back and smooth the upper layer. At the forehead, wear three thin locks.

2. Begin to braid the usual three-strand pigtail.

3. Having made 1-2 props, change the technique - turn the strands underneath and pick up loose curls from one side or the other. It will turn out the French Spit around.

4. Dolelet to the end and tie a rubber band.

5. Starting from the tips and moving up to the forehead, stretch the outer sections with your hands as much as possible.

6. Secure the result with varnish.

CORRUGATED COSIS

This amazingly beautiful weaving for long hair impresses with simplicity - everyone will be able to cope with it! With such a gorgeous haircut, you can go "to the feast and the world", and you can go to work.

1. Carefully comb and side parting.

2. Walk through the hair with forceps with a corrugation nozzle.

3. Divide the hair into four sections - top, 2 temporal and occipital. For convenience, pinch each into a clip.

4. Start weaving from the left temporal part. Divide it in half and braid two tight spikelets, picking up loose curls from one side to the other. Fix the tips of the ears with a clip.

5. From the right temporal part also braid two very tight spikelets. They will fulfill the role of clipped temples. Tips also secure with clamps.

6. Release the center part of the hair from the clamp. Divide it into three and begin to braid a free spikelet, without tightening the strands.

7. When you reach the level of the side sections, release the four first pigtails from the clips and gradually weave them into the central large braid.

8. From the base of the neck to the ends of the weave continue in the technique of "fishtail".

9. Tie the tip with a thin rubber band.

ten.Gently stretch the extreme slices of the pigtail with your hands to give it volume.

11. If desired, lay the braid in a bundle, slightly shifting it to one side. Pin it down with studs.

FISH KOSA WITH GUM

To create a volumetric braid, it is not necessary to possess complex techniques or special skills. This lightweight weave with elastic bands is available even for beginners.

1. Tie a high tail.

2. Wrap the elastic in a thin curl and stab the tip of it with an invisible one.

3. Take along the edges of two not very thick strands.

4. Connect them in the middle and intercept a thin rubber band to match the color of the hair.

5. Immediately under this tail, take two more curls. Connect them a little lower and also intercept.

6. Continue weaving to the tips.

7. Stretch the finished braid by the edges, giving it volume.

For medium hair (photo)

In this photo, the variants of voluminous braids for hair of medium length or short (not shorter than the bob). Braided braids on bangs or across the whole head in several rows.

spit fish tail in 2 versions,
braids with unilateral pickup in 2 rows and (snake),
2-dimensional French tail braid,
French back bangs (with hooks to the top),
reverse french braid.

We will begin to answer each question in detail and with video and photo instructions.

Corrugation in the French Spit, evening version

Analogue of braids, but a faster option is the “corrugation” nozzle. This option looks like twisting steps.

It does not matter whether your strands are the same or different, they will be removed later in the braid. Let us examine the weaving of the braid with giving volume with the help of the corrugation.

The technique of weaving the braid with corrugation is as follows:

Even just washed and dried hair will do.

Treat all hair with heat protection.
To twist the rim on the curler, paying special attention to the front strands, the back part in our evening hairstyle will be almost not involved.
Starting from the place above the ear, side parting.
Begin to weave a reverse French braid separating the wide and bulky 1st strand. Picking up strands from 2 sides so that the spit becomes as large and wide as possible towards the frontal part.

How to weave a reverse French braid is discussed in this article with diagrams, and the hooks are disassembled here.

Do the braid to the back of the head, continuing the usual one without grabs and tie it with a rubber band. Stretch each strand giving even greater volume.

It remains to collect the hair under the crab or pin up with a hairpin. Choose the one you like the most.

Sprinkle with varnish, hiding blemishes of weaving or loose strands. Laying down every link.

Finished hairstyle to inspect and stab sticking hairs with invisible women.

For ease of mastering the weaving of volumetric French braids, we recommend you to watch a video lesson from Neonila Bronstein, where the whole process of creating a hairstyle is shown step by step.

This option is suitable in such cases, when there is no time for pigtails, and corrugation is not available, then a braid with a fleece will be appropriate.

You should not do it on long hair or very fragile.

It can be sent to the root or to the strands, it depends on what kind of braid you invented yourself.

Cons: not properly performed bouffant leads to deterioration of the hair, brittleness.

Before you begin to perform it, watch the video on the correct combing and give your hair the right texture. Refer to such professionals as: Cat, Tatyanin or other hair masters.

Attempting to comb a comb is a major mistake.

It is necessary to get rid of it like this:

My head is not combing with shampoo and conditioner balsam.
When the hair is dry, we comb the hair with a comb with very rare teeth.

Barrettes or hair extensions

The first option is easier to implement, although both methods are not cheap.

The strands on the hairpins will give both volume and length at the same time, but hair extensions cannot do this.

These methods are good in continuous and long-term use.

When you constantly need to do this hairstyle, then the investment is justified.

Look at the look and length of the hair before the overhead strands and the result after. What is better building or overhead strands - this issue is decided individually by the girls.

Depending on the condition of the hair and advice of a hairdresser.

Do you dream of a voluptuous, chic braid like that of Elsa?

How to make such a scythe look in step-by-step photos.

If you are not fully understood the process, you will be helped by a step-by-step video with explanations.

Videos using a hairpin, hair curlers and strands on barrettes:

Pinching technology

In the process of weaving the reverse French braid, we stretch the links with a pinch technique, pulling only the extreme part of the links.

Separate the hair in the middle. Tie the second strand for the braids with a rubber band.
From the separated large strand, having led from the parting to the temporal region with the sharp end of the comb, we separate the thin strand.
We divide it into 3 strands, of which we will weave a reverse French braid. By inserting 2 fingers into the strand, we get 3.
We begin weaving, shifting the right strand under the central, then left. The second and subsequent propping, we do with pickup on both sides. When the prolet is done, slightly stretch the link over the edges. This operation is repeated to the occipital region of the head.

This technique is suitable for evening or delicate braids, giving the volume and width to each link, the braid itself acquires the lightness of the lace.

We pull all the link

Repeat all the steps from the previous technique to stretching the links.

After propping all the link to the desired volume. In this case, the braids are more voluminous and "rich", creating the impression of very thick hair and thick braids.

We recommend using this technique for owners of thin or not very thick hair.

Ladders enemies of volumetric braids

For those who have bangs in the shape of a ladder, engage in leveling and growing bangs for a voluminous braid.

To the owners of the ladder along the entire length, who want to have a voluminous braid, we recommend: trim and grow all your hair, so the braid will become more voluminous.

The techniques described above are used both in the French Spit and for the spikelet or fishtail.

Consider the option of giving volume spit spike

Video on the creation of volumetric braids on the model with a fish tail tail.

Educational video instruction on weaving a volumetric braid for long hair on yourself using fishtail technique.

Now you can make any braid volumetric with ease and in a few minutes. Use the knowledge gained and add volume to each braided French or ordinary braid.

Stay always charming and attractive, and braids let them complement your mysterious image.

Stunning volume braids for true ladies

The girl with the volumetric luxurious braid constantly catches the admiring glances of the stunned public. Such a reaction is predictable, because braids with voluminous weaving are quite fashionable and will decorate any woman, even the owner of fine hair.

The tricks used when weaving allow you to effectively present your hair and not leave indifferent observers.

In turn, we will try to explain to you in simple language how to braid a voluminous braid and become the owner of the trendy hairstyle itself.

Tricks from hairdressers

1) In order for the hairstyle to look neat, it is imperative that you apply the styling foam onto wet and combed hair. The fixative will make the hair more manageable for the realization of our pigtails.

2) Do not be lazy and curl your hair before weaving. Soft curls look in a spit very impressive.

3) Strands of our braids should not be tightly intertwined, but be more airy.

4) You should always have the necessary accessories ready, such as studs, hairpins and invisible ones. Before weaving, let them be at hand.

5) Hairspray is an indispensable item. If the event is solemn, you can use a brilliant fixing spray.

Secrets of increasing the volume of the spit

It is necessary to use a few simple and well-known antique secrets.

We remove man in braid

A simple wisdom, but rarely used by its owners not only a long person, but in vain. By adding a few strands and applying the stretching technique, you immediately get a bigger braid.

Lessenki enemies volume braids

For those, at which the gate has the shape of a log, will be occupied by leveling and growing the strip for the bulk braid.

Lesion owners at all length, wishing to have a voluminous braid, the recommendation: adjust and grow all hair, so the braid will become more volumetric.

The above described technologies are used both in the French Spit, and for the Kolkas or fishtail.

Consider the option of giving volume to the scythe of the studs.

Video of the creation of a volume braid on a model with a fishtail fishtail.

Educational video instruction on braiding a voluminous braid on long hair at home in a fishtail.

Now, you can make any braid volume with ease and in a few minutes. Enjoy the knowledge gained and add the volume of each braided French or ordinary spit.

Stay always cheerful and attractive, and the braids let your mysterious image fill up.

Air pigtail

Volumetric braids for long hair are created using this technology:

Parting the side and dividing the strands into two parts,
Start weaving, separating a small strand and dividing it into three parts,
The first interweaving is as usual, the left one passes over the middle one, then the right one,
From the third you need to add loose strands to the main braid, which are located on the right and left sides of the extreme beds,
Continue to braid in this way, moving the braid sideways,
All free locks are added to the main one,
When they do not remain, it is necessary to braid the usual braid further,
To fix the rubber band and release the strands, pulling in different directions,
Sprinkle with varnish.

Lace braid

Lace is created on the basis of the French braids.

We must start with the French technology,
When weaving, we need to pull the right strand outward in parts,
It is necessary to pull each hair away, so that between the central part and the right strand a cascade with gaps will appear, this is an open loop,
Repeat the same with the left strand,
Continuing, add loose strands and loop,
Reach the end, pulling the hinges,
Secure with a rubber band and slightly scratch the tips.

Volumetric braids - this is the trend of today.

If earlier they were considered an ordinary styling, then today different technologies allow creating incredible masterpieces on the head, suitable for any occasion in life.

Instructions with step by step photos

Select a small strand over your forehead and divide it into three parts. We begin to weave a pigtail on the contrary, starting extreme strands under the middle one and nothing else.

Next, select from the strand from the edge on the right side a thin thread of hair and fix it to the side with a crab.

Hair from the common head is constantly added to the main strand from the side. Then she dives under the middle along with the extra curl. In the photo, the additional strand is highlighted in white.

We perform the same actions on the left side strand, i.e. we postpone a small part and we pin on the side.

The additional strand is now attached to the strand on the left and we dive with a connected piece under the central one.

We continue weaving. It would be advisable to pull the side links every 4 steps. If this is not done, in the final version it will be much more difficult to create volume.

The result should correspond to the image below.

From free-falling strands we create another braid on top of the base.To begin with, we connect two strands on top, divide them by 3, and begin to weave a braid the other way around.

The falling locks are picked up to each tier of our pigtail.

We stretch, creating volume, and enjoy the result.

You can twist the ends and attach the braid with beautiful studs. Get a cute flower from the hair.

Spit of 5 strands

Now we will tell you how to weave a braid of 5 strands. Hairstyle performed strictly by the rules. So, combed hair grease with wax and tie in the tail.

The tail is divided into five equal strands, which should be numbered from left to right. We start weaving. Strand number 5 passes under the 4th, then overlaps the third, as indicated in the figure below.

The strand, having the 1st number, slips under the second one and also overlaps the third one.

Further actions are repeated link by link until the end of the braid weaving.

When we finish to the end, we fix the tip with an elastic band and pull out the links of the pigtail, reaching the desired volume. This braid is good for long hair.

For medium and short hair

What to do if nature does not endowed with long hair, and you want to please yourself with a pigtail, but not simple, but voluminous. Dont be upset. You can also weave beautiful voluminous braids on medium hair.

In addition to the banal braids from the tail or to the side, you can build a braid framing the head or elegant zigzag weaving. From our side there will be a hint how to make a simple braid of medium length.

You, having turned on your fantasy, will be able to diversify or supplement it with any favorite accessories.

To begin with, apply fixing wax on your hair and collect the hair in a high tail. If desired, you can do the same actions without a tail. From the head of hair in the tail weave the pigtail inside out. When the masterpiece is ready, we stretch the links and fix them with varnish if desired. Done! Simple, fast and effective!

Volumetric braids do it yourself

To date, the most popular hairstyle is a pigtail. And many girls like it volumetric braid.

In this case, it is not necessary to have thick and luxurious hair, because in the photo the voluminous braids look elegant even on a rare hair structure.

Many are interested in the question, how to braid a volumetric braid, for example, on a thin hair structure? You will need special strands (artificial or natural), which will help to give the desired amount of hair.

But there is a rule: strands should be in tune with the hair. But the weaving of volumetric braids on thick hair is a simple process.

The method of weaving standard hairstyles

Hair is well combed and divided into five equal parts. For straightness and smoothness of hair, you can use the iron. In this case, the strands will become more pliable, and the pigtails will turn out smooth, which looks more natural on the photo,
The first right strand is taken and superimposed on the next lying one.

That is, the first strand will be extreme,

The middle strand is superimposed on the last extreme

Further on the left strand is superimposed central

And the leftmost strand is superimposed on the next lying.

The result should be a beautiful volumetric braid, which looks spectacular, not only in life, but also in the photo.

You can also braid pigtails, consisting of six strands.

Double option

You will need a dividing comb, a hairpin for fastening, a rubber band.

Hair is carefully combed and sprayed with a fixative. On the forehead, a part of the curls is horizontally separated and divided into three equal parts. The weaving of the reverse version of the pigtail begins, that is, the strands must be placed under the bottom. Gradually, additional strands need to be woven either to the left or to the right.

It is worth considering a way to create a top option. All curls are divided into two equal halves. Then thin strands are separated from each part and shifted to the top of the opposite side. We do this with side pending strands: the upper one is divided in half and woven the same way as in the last paragraph.

In order for the volumetric braid to become lush it is necessary to do the following. Each strand from two sides is gently pulled out, that is, from the bottom up. In this case, you need to hold the center so that the pigtail does not break up. Our volumetric braids are ready. With this hairstyle you will shine not only in life but also in the photo.

So we answered the question of how to braid a volumetric braid. This hairstyle fits perfectly with any style and any image.

Volumetric braid: how to weave

Method number 11. Carefully comb hair. We divide them into five neat strands. If it is easier to weave, you can pre-straighten hair with a flat iron. Take the order that goes first on the right. We impose it on the strand next to it. This order will now become extreme.

We impose a central strand on the one that was at the very beginning extreme. 4. After that, we impose a central one on that strand, which is to the left of the present central strand. And we put the leftmost strand on the next one. A braid braided in this way will turn out to be voluminous and thick.

You can also braid a four or six strand volumetric braid.

1. Divide the hair into three strands. The left is located under the middle. And so on, constantly winding the strands under the average. Taking a strand of hair on the left, we combine it with a strand that has turned out from a braid. Then we send it again under the average. 4. On the right we weave in the same way. From the resulting convex pigtail, located on top of the hair, slightly pull the bottom strand. Then we continue pulling the strands on both sides, moving upwards along the spit. As a result, we get a volumetric and pretty braid.

Stylists offer another option for weaving volumetric braids. - in a rustic style. Careless weaving, as well as the interweaving of fabric strips and ribbons into the braid, will make it more voluminous. Ribbons and stripes of fabric must be selected in the same style and colors as your clothes.

Volumetric braids - lush and rich

A variety of braids, simple and complex, short and long, flat and voluminous - without this, perhaps, the most simple in its traditional performance, but very stylish in its countless variations, styling is impossible to imagine the image of the modern owner of long hair.

Recently, on the catwalks and in fashion magazines, we increasingly see models with original braids, lush and voluminous. Such weaving looks really luxurious. From the side it may seem that volumetric braids can be created only from thick and long hair, but in fact even quite thin hair of medium thickness is quite suitable for bulk weaving.

Salt spray

Apply saline spray on still wet hair, paying special attention to the root zone. The spray will fluff the hair and add extra volume to the strands.

Bulk drying

To give the hair volume, it is important to blow-dry the hair without using any attachments. The enhanced air flow “coarsens” the cuticle and the hair becomes visually more luxuriant and heavy.

We twirl hair in the upper part

Using a styler, wind the strands along the hairline, twirling them in different directions. All our steps in this case are aimed at giving the hair extra volume.

If you are using a styler with a clip, just wrap the strands around the rod, holding the tip with your fingers, the clip should not be used.

By twirling your hair this way, we’ll achieve a soft, natural curls effect.

Twisting the tips

So that the weaving does not “eat up” the length, you should not wind the hair along the entire length, it is enough to twist only the tips.

Combing

Gently brush your hair with a pork bristle brush. Natural bristles expand the curls, rather than breaking them like a plastic comb.

Use a spray to give texture

Apply a texturizing spray over the entire length of hair from the roots to the tips. Spray will give volume at a follicle and on length.

Weaving

And now we braid a braid, such as you like, a classic of three strands, a fishtail, a Dutch braid, a waterfall, or any other. When braiding a braid, do not braid too tight, medium tension is enough.

Add volume

Spread the weave horizontally, begin to push the weave moving from the center to the outer edges.

Then it all depends on how lush you want to make your braid. In principle, at this stage you can stop, but if you want a truly volumetric mega braid, repeat the step with stretching the braid to the sides again.

Good advice: in some cases, certain coloring techniques are used to add extra volume to the hair. A specific way of highlighting through color contrast gives hair the effect of density and volume.

Volumetric braid options

To create a deliberate negligence in combination with the volume in the hairstyle requires a certain skill, because the styling, in this case the braid, should look not disheveled, but really stylish. Offset side braid with the effect of "tattered" - the perfect version of this hairstyle.

Volumetric braid from one side

This braid fits perfectly in almost any image, with such a hairstyle you will look stylish on the beach and at a cocktail party.

Apply mousse to clean, damp hair to add volume. Dry your hair with a hair dryer at an average temperature, while your hair is still a little wet, lower your head down, and then lift it up, so that the hair will be slightly raised at the roots.

Sprinkle hair at the roots with a special spray and lightly comb it with thin thick teeth. Pack gently, separating small strands.

Having reached the desired volume, collect the entire mass of hair on one side and braid them in a braid to the very bottom. If you have enough time, it is better to braid the braid using the fishtail technique. The usual three-strand braid looks no less stylish, the main thing is to distribute the volume correctly.

Do not braid the braid too tightly to make it wider and more voluminous; stretch the braid to the sides, giving the braid the desired shape. In conclusion, sprinkle hair with hair spray medium fixation.

Spit in the style of the Disney heroine Elsa

Step 1: After applying the thermal protector, wind the hair using a styler. If you have naturally wavy hair, you can skip this step.
Step 2: Then proceed to combing the strands, if you have hair powder, apply a little. Stir hair at the roots and fix hairspray.
If you have not too thick hair or you want to achieve maximum similarity with the Disney heroine, use artificial strands.
Step 3: Assemble the top of the back of the tail. Front strands can be left free.
Step 4: From the hair collected in the tail, start to weave a regular braid of three strands.
Then begin to include additional strands in the weaving, attaching them to the side strands. Now we weave a French braid.
Step 5: Take the first strand from the top, add it to the right strand before crossing both strands through the central strand. We take a strand from the left side and add it to the left strand, then transfer it through the central strand.

Repeat these steps until all hair has been woven into a braid.

After the end of the braid is fixed with a rubber band, gently stretch the weaving to the sides so that the braid becomes wider and visually larger.

Original volumetric braid without weaving

If you really like beautiful, voluminous braids, but weaving various braids is obviously not your forte, there is a way out! Volumetric braid can be made of tails tied in a certain way.

The technique of creating this hairstyle is quite simple, although this braid looks original and difficult. The main technique in this hairstyle is to tie a regular tail and a little knack.

Based on such fake weaving, you can make a variety of hairstyles: fake "Iroquois", high hairstyles and so on. It is best to create this hairstyle fit long hair with a uniform length, preferably without a haircut "ladder".

What we need:

Thin hair ties (it is better to purchase a set of special rubber bands for weaving, preferably to match the hair.)
Means for giving hair an additional structure (optional)
Barrettes - Invisible (optional)
Clamp

Means for texturing hair is useful if you work with clean fresh hair. In what form this tool will not matter, it can be a spray, wax, lipstick or cream.

It is rather difficult to work with freshly washed hair, so it is better to weave such a braid the next day after washing your hair. If the root zone seems to be too oily, use a dry shampoo.

Separate the hair over the ears starting from the corners of the forehead, and connecting them with the upper part of the hair, collect the tail at the crown, fix the tail with an elastic band.
If you want to hide the gum, separate the small hair strand from the tail and wrap it around the base of the tail. Secure the tip of the strand stealth.
Pin the tail with a clip or "crab" at the top so that it does not interfere with work. Then, separating the hair in the front, wind it back and tie another tail directly under the first one.
Release the upper tail and divide it into two equal parts.
Pass the second tail through the place of separation and popolite for a while so that it does not interfere.
Under the second tail we tie the third. This time we include the ends of the first tail into the tail. It is necessary that the first tail forms something like brackets around the second tail.
Release the second tail and divide it into two parts.
The third tail passes through the section and pin up. Now we are ready to tie the next tail, including the tips of the second tail. Continue to work in the same technique until the “weaving” reaches the neck.
When you reach the head, tie the last tail of your remaining hair. This concludes the “French” part of our braid and will continue to weave the braid without adding strands.
Loosen the top tail (the one that was pinned) and tie the elastic about 5 cm below its previous position.
Use your fingers to spread this part of the weave, so that a hole is formed there. Stretch the tail from the bottom through this hole so that it becomes the upper tail. Repeat these steps to the end.
Finish the braid by fixing all the ends of the hair with an elastic band.

Now gently stretch the weaving to the sides, giving the spit additional volume.

That's all, our braid looks just amazing and few people can guess that it is made from ordinary tails.

How to Weave Volumetric Braids. Video Weaving in 4, 5 or more Strands. A photo

Weaving volumetric braids is not so difficult, and sometimes very easy. After carefully watching the video master classes, you can easily repeat these masterpieces on your hair.

Volumetric braids look not only beautiful, but also very fashionable. Looking at such a gorgeous braid, it seems as if its owner has simply luxurious thick hair. Although, in many cases, this is far from the case, and with the help of simple and simple tricks you can achieve the desired lush and three-dimensional effect.

Weaving volumetric braids is not so difficult, and sometimes very easy. After carefully watching the video workshops on such fashionable weaving, you can easily repeat these masterpieces on your hair.

The most fashionable braids, hairstyles in the Greek style.

Braid weave

Now we will learn how to weave an inverted braid. This is a very unusual type of pigtail and quite simple in technique. We throw all the hair in the side on one side and collect them in the tail.

Further, (we have already described such a technique before) from the top of the gum we divide the hair into two parts and draw the resulting tail between them. Again, fix the hair with a rubber band and repeat the steps from beginning to end.

The original and light volume braid is ready!

4-strand braid

Ooo-very beautiful braid of 4 strands, in which the role of one strand is performed by a ribbon or scarf, which is initially carried out in the form of a rim around the head. So, we have four strands (together with the ribbon), let the 1st go under the 2nd, 2nd to the 3rd (this is the tape), 4th to the 2nd, 3rd to the 4th. Remember this pattern of weaving and repeat it to the end.

5 strand scythe

Beautiful original weaving of 5 strands. We separate a small strand and divide it not yet in three parts, weave an ordinary pigtail. Separate the same order and repeat the action. The rest of the hair is divided into three strands, plus we add to it already ready two braids.

So, we got 5 strands. We start weaving: 1st under 2nd, 3rd and 4th (pigtails) on 1st, 1st on 5th. Now back: the 5th to the 4th (pigtail) and under the 3rd (pigtail) and to the 2nd. Now we will begin the report anew: 2nd on 3rd and under 4th and on 5th. Again: 3rd under 4th, 4th under 2nd and on 1st.

Further, we braid according to the scheme.

3D Spit video

We collect hair in a ponytail. We separate the thin strand, and its another three, and weave a braid. We divide the rest of the hair into three strands, together with a pigtail we get four. So, 1, 2 is a pigtail, 3 and 4. First row: 4 under 3 and 2 (pigtail). Second row: 1 to 2 and under 3 (pigtail). Further, we repeat the first row, the second, the first, the second ... Your exquisite volumetric braid of four strands is ready)))

How to quickly and easily learn to weave braids yourself: effective photos and videos

At all times, long hair was highly valued and was an indicator of femininity and beauty. But they require a lot of care. A lot of time, effort is spent on all possible styling and hairstyles. You can, of course, trust the master and get a chic braid, curls, beam, tail ... Lack of time and opportunities do not always allow you to do this.

For a long head of hair for every day, for important and special events, playing sports or walking, a spit is an excellent option. Technique is a lot of braiding. There are simple, uncomplicated, which take a few minutes. And there are more complex, requiring skills and experience.

Today we will understand how to braid itself a beautiful braid that you may need and what are the options for a simple performance.

Elementary ways of braiding

The easiest is the technique of weaving an ordinary braid. It is simple to perform, has many options. Let's start with the easiest - three strand braid.

Build this hairstyle is not difficult even for a beginner. All that may be needed is a comb and a rubber band (barrette) for fixing the braid.

This hairstyle takes only 5-7 minutes, and the result is perfect for everyday wear.

Step by step weaving instructions:

All hairstyles, including a braid, require carefully combed hair. From it form 3 strands.
The rightmost strand is transferred over the central one and lies between it and the leftmost one.
Next, take the left strand and through the middle is set in the center.
So the right and left extreme strands alternate, the braid is woven to its full length.
The tip is fixed with an elastic band (barrette).

Diversify the option of weaving in three strands can tail. The hair is collected at the bottom base of the head or on the top and fixed with a rubber band. Weaving from the tail occurs using the same technology. The advantage of this option is a stronger hairstyle. The tail keeps her from disintegrating. Individual strands harder to break out of the crowd.

All the same braid with three strands can turn into a spikelet, if you begin to braid it from the forehead or line of the beginning of the bangs. This hairstyle will require several workouts, as the strands will initially be hard to hold together, pulling out the next curl. But in the end you get a very cute haircut.

The technique itself is not much different from the usual braids. But you should still watch the video for beginners - how to weave pigtails with the technique “Kolosok”

Original options from a large number of strands

Weave braid can be from different numbers of strands. This is a bit more complicated than the traditional version, but possible. Using different techniques, get rather unusual hairstyles. They can be supplemented with any image: a strict office suit or evening dress, a light summer dress or a suit for sports training. This braid will decorate in any situation.

We will understand how to weave a pigtail of 4 strands. There are several schemes for such weaving. They are slightly different. But the essence and the result is one.

It is important to clearly distinguish between curls and observe the sequence of throwing, one goes up, the other under the bottom. The whole difference is in choosing a more convenient option. But the beginning is always the same.

This is a thorough combing of the hair and the formation of the necessary number of strands.

The first way:

Wicker begins with the extreme (first) left strand. It should lie on the second (neighboring), under the third and on top of the fourth.
The next row also starts with the left strand. She again lay down on top of the second and fourth and under the third.
So the whole braid is woven: all the rows go from the left edge to the right.

The second way:

Weaving also begins: the leftmost strand goes from above to the next, below the third and from above to the last.
The last fourth strand is second from the right. Now you need to move in the opposite direction. This strand should be placed above the next left and below.
The result is that the leftmost strand becomes the second. And the cycle is repeated again from left to right.

The third way:

On the left, the outermost strand should be placed on top of the next one, and the third over the last one (on the right).
The center produces the first and fourth strands. They need to cross over so that the first was under the fourth.
Further weaving continues the same way.

You can decorate an unusual braid with the help of satin ribbons. They can be woven instead of one or two strands. Get an elegant option. You can use the ribbon and braiding a spike of four strands. In this case, at the beginning, only a part of the hair is used for weaving, and then the remaining strands are added. And help you learn how to weave braids video with a good example of using tape.

Having mastered the technique of braiding from 4 strands, you can add one more. This hairstyle will make the image unusual. This is a great option for even hair.

If they are curly, such a braid can also be woven, but you will need to add funds for fixation. In preparation for the creation of hairstyle hair can be slightly moistened. This will facilitate the process of laying strands.

So how to weave a pigtail of 5 strands right?

Step-by-step instruction:

First you need to comb the hair well, then divide them into 5 parts.
Braiding begins with the last strand on the right. It must be placed above the second, under the central.
On the left side, the same thing is done: the outermost strand falls on the adjacent one and under the central one.
Next, take a strand on the right, then on the left, and so with all the hair.

How to weave a volume braid?

Spit can turn out voluminous, if weave it over it. The basis of this option is the French braid. But the technique is a little different. Strands should go under the bottom. Due to this, the volume is obtained. It is worth considering, the strands will be thicker, the spit will be thicker.

Consider how to weave a volumetric braid step by step:

First, it is worth separating 3 strands on the crown
The extreme right is located under the center.
Further, the leftmost also give birth to the average.
So all the weaving happens, but further to the extreme strands you need to add a lock of unused hair.
At the end of the braid is fixed with a rubber band.
The free part of the braid can be picked up, turned up and strengthened by stealth or hairpin.
To decorate the hair, you can slightly loosen the braid, making it even more voluminous.

Volumetric braid can be braided not only smoothly, but also on its side. The technique itself remains the same. Only the beginning and direction of movement change.

Therefore, before weaving a pigtail on its side, you need to determine its location.You can start from one ear and moving through the crown to weave to the second. And then already weave down.

You can also start from the ear to move through the head. The main part of the spit will be in the back, but its part will lie on its side.

For better understanding, we recommend that you familiarize yourself with the video for beginners - how to braid the braids to the side.

How to weave a braid around your head?

The location of the scythe around the head is quite popular. They are very practical, especially in the summer. Hair collected around the head, do not interfere, do not stick and do not get confused.

This hairstyle is useful for any age and style of clothing, for everyday wear and special events. There are several ways to make a wreath of braids.

Consider in more detail how to weave a braid around your head.

Method one

This is a classic version that will suit owners of very long hair. It is very simple, it takes only 5 minutes of time. First, a tail forms in the lower part of the head. With it the usual braid is braided.

Further, it is located around the head and fixed stealth and hairpins. At the end of hiding the tip. Choosing this option, it is worth remembering that the hair should be enough to grip the entire head.

If the length is not enough, it is better to use another method.

Second way

If the length is not enough, you can use two braids. First you need to make a parting in the middle of the head. Braid on the sides of two simple braids.

Next, they need to lay around the head and fix stealth or invisible pins. Free tips worth hiding. To add originality, you can add a little bit of confusion.

To do this, some strands in a chaotic order need a little loosen and tousle.

Third way

This weaving is more complicated. It will be based on the French braid. It is better to start from one ear and move in a circle. Three strands stand out. The extreme right winding over the middle one, then also done with the extreme left. Further, the weaving follows the same pattern, but the strand from the head is complemented by loose hair. And the strand from the center of the head is not.

Fourth method

This technique is a separate version of this hairstyle. It is called the crown. This is a rather complicated technique for independent execution. But if you practice, you can get the original hairstyle. So how to weave a braid crown?

Technique:

To select a portion of round-shaped hair at the crown and make a tail of it (it is advisable to use a thin elastic band to fix it).
Take part of the hair near the ear, divided by 3.
You need to start braiding like in the previous case. But it is already possible to interweave additional strands on each side.
For interweaving, it is worth taking identical strands so that the hairstyle looks harmonious.
After completing a full circle, you need to hide the remaining ends of the hair and fix the invisible.

A visual demonstration of technology can be seen in the video for beginners - how to weave braids in the form of a crown.

Romantic wicker heart

To create a gentle, feminine image, regardless of age, an interesting technique of heart weaving will help. Options for this hairstyle there are a large number. We will focus on several ways of how to weave a braid with a heart.

Option 1:

• First you need to part the center. One half of the hair can be stabbed so as not to interfere.

• The rest of the hair must be divided by another 2. This should be done in a semicircle.

• You need to start weaving from the parting, moving to the temple. Used technique of the French Spit.

• In the process of weaving you need to round the braid to the temple. From it weaving continues down.

• At the base of the hair, the braid should be fixed with a rubber band.

• The same should be repeated from the opposite side.

• The remaining tails need to connect and build a simple braid of them.

• Finally, you need to fix it with a rubber band (barrette). You can slightly weaken the weaving of the lower part to give it volume.

Option 2.

It is similar to the first.The main difference is that the strand is twisted into flagella, and then woven into a braid. Starting from the temple, additional strands are no longer woven, but remain simply fluffed. The two braids obtained are interconnected. They do not need to fly to the edge.

Option 3.

• It is necessary to separate the hair first from one ear to the second through the back of the head, and then in half in the center.

• The right and left upper parts should be braided into pigtails.

• Then you need to wrap them half a heart and connect.

• The design can be strengthened with studs or stealth.

Option 4.

A very simple way to braid an inverted hearts braid. This technique uses small rezinochki. The whole hairstyle takes less than 5 minutes. Technique is proposed in the video for beginners - how to weave braids from hearts.

We looked at ways to braid a pigtail beautifully and quickly, without turning to experts. Technician and a lot of options. Showing a little imagination, you can create masterpieces without leaving the house.

It is very easy to find interesting options for everyday use or for important events. They are not only comfortable, but also feminine, elegant and original.

To simplify the task, you should follow the photo lessons and video of how to braid a beautiful braid. With their help, long hair care is greatly simplified.

Send

5 styles in the bride's hairstyle: types of styling

Depilation of intimate places with cream: gentle, effortless cleanliness

How to braid two pigtails on the sides: tips

How to make a bunch on the head

Lice is not a problem

Pencil Eva Mosaic ideal brow for the eyebrows

How to use soda against dandruff

Do you dream of long hair? Build them up!

How to braid volumetric braid?

Volumetric braids: with tail and without

We add volume with oblique bangs and without

Simple volumetric braid

Volumetric French braid on the contrary

Spit fish tail

French waterfall

Square braid

Spit with a tape in the center

Spit with two ribbons

Scythe "Chain" with ribbon

Spit "Waterfall" with ribbon

Spit on its side

Training

Simple braid

Fish tail

How to weave a French braid?

Danish braid

How to braid volumetric braid?

Spit Accessories

Technique of self-weaving volumetric braid itself

Video how to braid volumetric braid itself

5 working tips how to weave volumetric braids? (photo, video, scheme)

What kind of braid do you dream?

Double braid - weaving scheme according to the type of reverse French braid:

Double braid - weaving scheme as usual braid:

What spit do you want?

Volumetric braids for long hair (photo)

On the middle hair (photo)

How to give volume to a spit?

Top 11 fashionable, stylish hairstyles:

Top 10 Hair Care Secrets:

SPREAD FRENCH COSA

CORRUGATED COSIS

FISH KOSA WITH GUM

For medium hair (photo)

Corrugation in the French Spit, evening version

Barrettes or hair extensions

Pinching technology

We pull all the link

Ladders enemies of volumetric braids

Consider the option of giving volume spit spike

Stunning volume braids for true ladies

Tricks from hairdressers

Secrets of increasing the volume of the spit

Air pigtail

Lace braid

Instructions with step by step photos

Spit of 5 strands

For medium and short hair

Volumetric braids do it yourself

The method of weaving standard hairstyles

Double option

Volumetric braid: how to weave

Volumetric braids - lush and rich

How to Weave Volumetric Braids. Video Weaving in 4, 5 or more Strands. A photo

Braid weave

4-strand braid

5 strand scythe

3D Spit video

How to quickly and easily learn to weave braids yourself: effective photos and videos

Elementary ways of braiding

Original options from a large number of strands

How to weave a volume braid?

How to weave a braid around your head?

Method one

Second way

Third way

Fourth method

Romantic wicker heart

Watch the video: Twisted braided hairstyles that give you a big volume. Greek braid twisted updo Low and high bun (May 2024).

Interesting Articles